Niveaulows" sticker for the front or rear window several colors

The sticker is resistant to most cleaners.
The sticker is also insensitive to steam jets, car washes, etc.
The sticker is temperature resistant between -50°C and +120°C.
The outdoor durability is up to 8 years (depending on the color).
Indoors, the sticker lasts almost indefinitely.

The stickers are contour cut, which means only the letters or logo are visible on the object afterwards.
After the cutting process, the stickers are covered with a special transfer film to make them easy to stick on.


Instructions for optimal installation:

1. Bring the desired area to a grease-free condition. (Surface Cleaner, Silicone Remover)

2. Bonding should under no circumstances be carried out at ambient temperatures below +10°C (if necessary, heat the desired area with a hot air dryer beforehand). After bonding, the ambient temperature should not be subject to major fluctuations for approx. 72 hours.

3. Slowly remove the back of the sticker (backing film). Make sure that all parts of the sticker are absorbed by the transfer film.

4. Stick the sticker to the desired location and apply pressure several times over the sticker to ensure perfect adhesion.

5. Slowly loosen the front of the sticker (transfer film) and remove it from the film at an angle of 180 degrees. If the motif remains on the transfer film, go back a little, stroke the film again and continue the removal process.


All dimensions are approximate and may vary by a few mm.