102 Logo Rose" JDM Car Sticker for your windshield or rear window

102 Logo Rose" JDM Car Sticker for your windshield or rear window

The sticker is resistant to most cleaning agents.
In addition, the sticker is insensitive to steam jets, car washes, etc.
The sticker is temperature resistant between -50°C and +120°C.
Outdoor durability is up to 8 years (depending on colour).
Indoors, the sticker lasts almost indefinitely.

The stickers are contour cut, which means that only the letters or the logo are visible on the object afterwards.
After the cutting process, the stickers are covered with a special transfer film to enable easy sticking.


Instructions for optimal attachment:

1. Bring the desired area to a fat-free state. (Surface Cleaner, Silicone Remover)

2. The bonding should never be carried out at ambient temperatures below +10°C (if necessary, heat the desired area with a hot air gun beforehand). After bonding, the ambient temperature should not be subject to major fluctuations for about 72 hours.

3. Slowly loosen the back of the sticker (backing film). Make sure that all parts of the sticker are absorbed by the transfer film.

4. Stick the sticker in the desired place and rub the sticker several times with pressure to ensure perfect adhesion.

5. Slowly loosen the front of the sticker (transfer film) and remove it from the film at a 180 degree angle. If the motif remains on the transfer foil, go back a little, stroke the foil again and continue the detaching process.


All dimensions are approximate and may vary by a few mm.